Tutorial: How to Create a Halloween Icon Pack Using Adobe Illustrator (Resources Included)

How to Create an Icon Pack using Adobe Illustrator

Since Halloween is just around the corner, we thought we should give you an early treat this year, in the form of a little icon tutorial. The idea was to show you guys how to create a cute set of three icons from scratch, using some of Illustrator’s basic tools such as the Shapes Tool, combined with the power of the Pen Tool and Pathfinder panel.

In terms of difficulty this course is aimed at those who have a basic knowledge of how Illustrator works, but that doesn’t mean beginners can’t give it a go, since every step is presented as explicitly as possible.

So, assuming you have Illustrator up and running, let’s jump in and start creating!

Download the: How to Create a Halloween Icon Pack Resources (AI + EPS Files)

1. Setting Up Our Document

The first thing you should always do, no matter the project, is make sure that you start off on the right foot by setting up a proper document.
So, go to File > New (or use the Control-N shortcut), and let’s go through some of the settings that need adjusting:

  • Number of Artboards: 1 – since we will be creating a small pack, one Artboard will suffice
  • Width: 800 px – which is the overall width of our Artboard
  • Height: 600 px – which is the overall height of our Artboard
  • Units: Pixels – this setting is really important since we will be creating for the digital medium, so screens and other display devices, which are pixel based.

And from the Advanced tab (which can be made visible by clicking on the little right facing arrow):

  • Color Mode: RGB – which is the color mode for the digital medium
  • Raster Effects: Screen (72 ppi) – this option controls the way drop shadows, textures and other effects are displayed on different media. If you’re creating for the screen 72 ppi will suffice, but if you’re designing with the intent of printing the final artwork on paper, then you should go with one of the higher values
  • Align New Objects to Pixel Grid: checked – as we want everything to correctly snap to the Pixel Grid

how to create an icon pack using adobe illustrator

2. Setting Up Our Layers

Once we’ve properly set up the document, we should take our time and think about the project itself in terms of layers.
Usually when I create detailed artwork, I find it useful to separate the different sections from one another using layers. This way I can easily work on a specific part of the design, without worrying that I’ll accidentally misarrange or affect my other shapes.
Since in our case the project is composed out of 3 assets (icons), it would be a good idea to create a layer for each one, so that we can better manage and edit them along the way.
So, assuming you know how the Layers panel works, let’s create 4 layers and name them so that they’ll be easier to identify:

1. grids – which will house the simple custom grids, that we will be using in order to create a cohesive pack
2. pumpkin
3. gravestone
4. eyeball

how to create an icon pack using adobe illustrator

3. Setting Up a Custom Grid

For those new to the Grid, well you shouldn’t worry since it’s not that hard to master. At its core, the Grid is a system of vertical and horizontal lines that allow you to compose and position you artwork with a high level of precision. It is usually used in UI design, where the process of creating a balanced composition requires the designer to put a lot of consideration into the relation established between the different visual components.

But as with most of Illustrator’s tools, this too gives you the ability to do so much more with, one particular one being that of creating pixel crisp artwork.

Since I’m a strong believer in creating with Pixel Perfection, I always set up my Grid to the lowest values since this will assure me that my shapes are as crisp as possible.
Illustrator itself comes preconfigured with a default set of values, which we will have to adjust in order to be on the same track, by going to Edit > Preferences > Guides & Grid.

Here, a new popup window should appear giving us the option to adjust the following settings to the values indicated below:

  • Gridline every: 1 px
  • Subdivisions: 1 px

Once you’ve entered the indicated values, you need to make sure that the Grid snapping is actually active by going to the View menu and clicking on the Snap to Grid option.
At this point, we’re pretty much done with the adjustment process, which means we can now move on to building the custom icon grids.

how to create an icon pack using adobe illustrator

4. Defining Our Icon Grid System

If you’ve ever created icons before, then you should know that the first step one needs to take when creating a new icon pack, is figuring out the size of the assets. There are a dozen of available options depending on where the icons themselves will be used, options that range from just 16 x 16 px all away to 256 x 256 px and even beyond that.
Now, for our current project, I’ve decided to go with something relatively large, more exactly 96 x 96 px, which means that our icons will be big enough so that we can put a considerable amount of details inside of them.

Once you’ve decided on your size, which we did, you will have to create a custom icon grid, which will allow you to build within that size boundary, which in the end will give you the ability to create an all-around cohesive icon set.
The grid itself is usually a square, since this shape allows you to push your pixels all the way to the limits of the confined space.
Yes you could add a bunch of horizontal, vertical and diagonal guides, for a deeper level of consistency, but in our case, a simple square will do the trick.

Step 1

So assuming you’re on the “grids” layer, lock all the other ones and create a 96 x 96 px square using the Rectangle Tool (M). Position the shape to the center of your Artboard by selecting it and then using the Horizontal and Vertical Align Center options found under the Align panel, making sure that the alignment is done to the Artboard and not to a Key Object or Selection.
Once you have the guide in place, change its color to a light grey (#e6e6e6) so that it will be easily visible without drawing too much attention.

Quick tip: in case your Align panel isn’t showing the Distribute Spacing and Align to options, that’s because you didn’t told Illustrator to do that. To change this, simply click on the right corner down facing arrow and then enable the Show options feature and you should be good to go.

graphic 4

Step 2

Now, since I usually like to give my icons some inner padding, I tend to add a relatively smaller square to the one I already have.

If you’re wondering why, well let’s just say I like to fool proof my designs so that when exported, I can be sure that none of the sides of the icons gets accidentally chopped off. This would result in a flawed file.

So, using the Rectangle Tool (M), let’s create a smaller 92 x 92 px one, which we will position over the one we already had, giving it a slightly lighter shade (#f2f2f2).

graphic 5

Step 3

Since we will need a pair of grids for each of our icons, we will have to group the first one that we’ve just created using the Control-G shortcut, and then create two copies which we will distance at 60 px from the original using the Horizontal Distribute Spacing option.

graphic 6

At this point we’re done setting up the icon grids which means we can move on to creating our first icon, the creepy little pumpkin head.

5. Creating the Pumpkin Head Icon

Assuming you’ve locked the “grids” layer, and moved up onto the “pumpkin” one, we can start working on our first icon from the set.
Since all of our icons will have a fill/inner section and an outline, we will follow a pretty straightforward process of creating the inner section first and then applying a 4 px outline to it using the Offset Path effect.

Step 1

That being said, let’s grab the Rounded Rectangle Tool and create an 84 x 70 px shape with a 35 px Corner Radius which we will color using a dark orange (#bf7355) and then position over the first set of grids, so that we have an even gap of 4 px between it’s left, right and bottom sides and the larger grid itself.

graphic 7

Quick tip: I recommend you turn on the Pixel Preview mode by going over to View > Pixel Preview, since most of the steps from this tutorial will rely on using this mode. I will also be giving you some pretty precise details when it comes to positioning the composing shapes.

graphic 8

Step 2
Once we have our inner section of the pumpkin, we can give it an outline by selecting it, and then going to Object > Path > Offset Path and giving it an Offset of 4 px.

graphic 9

This will create a larger shape just under the selected one, which we will have to color using a dark color (#392a16).

graphic 10

Step 3

As soon as we have our outline, we can add the all-around inner ring highlight by first creating a duplicate of the orange fill (Control-C > Control-F) and then adding a smaller 80 x 66 px rounded rectangle with a Corner Radius of 33 px to the center of the fill shape.

This smaller shape will help us create a cutout, which we will do by selecting both it and the shape underneath, and then using Pathfinder’s Minus Front option.

graphic 11

Step 4
Since the resulting shape isn’t quite there, we will have to change its color to white (#FFFFFF) and then set its Blending Mode to Overlay while lowering its Opacity level to 20%.

graphic 12

Step 5
Add a little texture to the surface of the pumpkin, by drawing a bunch of 4 x 4 px rectangles which we will color using a darker shade of orange (#9e5943). Then make sure to have them positioned underneath the highlight that we’ve just created, by sending the highlight to the front using the Arrange > Bring to Front option.

Don’t forget to select all the composing elements of the texture, and group them together using the Control-G shortcut, since you wouldn’t want the elements getting misplaced by accident.

graphic 13

Step 6
Next, we will start working on the vertical delimiting lines, which will give the pumpkin its nice curved look. To do this, we will first create a 44 x 70 px ellipse to which we will apply an Offset Path effect of 4 px.

Now, with both shapes selected, use Pathfinder’s Minus Front option to create a cutout from the larger ellipse, which will result in ring like shape that we will adjust by cutting it in half by removing its right section, and then changing its color to #392a16.

Position the resulting shape towards the left side of the pumpkin fill section, leaving a gap of 8 px between it and the larger outline.

graphic 14

Step 7
Create a copy of the curved line and position it towards the right side of the pumpkin, making sure to reflect it vertically (right click > Transform > Reflect > Vertical).

graphic 15

Step 8
Add a secondary pair of vertical rings by creating a slightly narrower 28 x 70 px ellipse, to which we will apply Offset of just 2 px. Repeat the same process of removing the inner shape from the created offset, and then cutting the resulting ring in half, making sure to position a copy on both sides of the pumpkin at about 10 px from the thicker rings.

graphic 16

Step 9
Next, let’s add a couple of highlights and shadows to the rings, in order to give it more depth.

First let’s add the highlights by creating a copy after the rings and moving them slightly towards the inside of the pumpkin. Make sure to change their color to white (#FFFFFF) and set their Blending Mode to Overlay lowering the Opacity to just 20%.

graphic 17

Step 10
Add the shadow by repeating the same process – only this time, position the shapes towards the outside of the pumpkin, setting their color to black (#000000) while changing their Blending Mode to Darken and lowering their Opacity to 30%.

graphic 18

Step 11
As you can see, the highlights and shadows go over the actual outlines and highlight of our pumpkin which is something that we don’t want them to do. To fix this, we will have to create and apply a clipping mask in order to hide the parts of the details that we don’t want overlapping.
First, we will have to create the mask itself by creating a copy of the ring outline, and then separating its inner path from the outer one by right clicking > Release Compound Path. Once the path is released, we will have to select and delete the larger shape since we will be using the smaller one.

graphic 19

Step 12
With the resulting shape from step 11 and both the highlights and shadows selected, right click > Make Clipping Mask.

graphic 20

Step 13
Since some parts of the details still go over the outlines, we will have to select all the vertical rings and bring them to the front (right click > Arrange > Bring to Front).

graphic 21

Step 14
Before we start adding the face features, let’s add one more vertical ring highlight towards the right side of the pumpkin, positioning it a little towards the middle.

Follow the same process as before, only make sure that you’re creating the shape inside the actual clipping mask by double clicking on one of the composing elements, or by right clicking > Isolate Selected Clipping Mask.

Once you’re done simply exit the Isolation mode by pressing Esc.

graphic 22

Step 15
Up until this point we’ve followed a pretty strict do-this-then-that workflow, so I thought it’s time I gave you a little creative freedom and let you “carve” your pumpkin by your own, so that in the end you will have something special to show off with.

The only thing that you will have to keep in mind is that no matter the expression, you will have to keep the detailing process consistent by adding a 4 px outline to each of the created shapes. Also, for the fill colors you could use lighter or darker shades of orange, I for example, have gone with something darker (#634133) but you don’t necessary have to use the same tint if you don’t feel like it.

That being said, take your time and once you’re done move on to the next step.

Quick tip: there might be situations where the Offset Path trick will produce irregular outlines, so for those cases try and use a 4 px stroke instead.

graphic 23

Step 16
Assuming you’re carved an awesome scary look, let’s start adding the finishing touches, by working on the pumpkin’s top side that houses the vine.

First, grab the Ellipse Tool (L) and create a 20 x 6 px shape, which we will color using a dirty light green (#87826f) and then position towards the top section of our pumpkin, making sure to position it underneath.

Oh, and as always don’t forget to give it that 4 px outline!

graphic 24

Step 17
Add a highlight to the vine’s base by creating a duplicate of the green shape, and then cutting out a smaller 18 x 4 px ellipse out of it. Color the resulting shape using white (#FFFFFF) and then change its Blending Mode to Overlay while lowering the Opacity level to 40%.

graphic 25

Step 18
Finish off the vine by adding a 4 x 4 px square towards its top, which will act as the tip. Then change its color to a darker green (#757061) and give it an outline, only this time make sure to set the Joins option to Round.

Finally add a couple of highlights to the top and right side and a vertical divider towards the center, making sure to send all the tip’s elements to the back (right click > Arrange > Send to Back). You should also group the elements together (Control-G) so that things won’t end up being misplaced.

graphic 26

Step 19
Add some “hair” to our little old pumpkin, by drawing a couple of curved paths using the Pen Tool (P), keeping the stroke Weight set to 1 px and the Cap to Round.

graphic 27

Step 20
Finish off the icon by adding three diamond like highlights towards its middle right section, which will have their Blending Modes set to Overlay and their Opacity levels to 60%.

graphic 28

6. Creating the Gravestone Icon

As soon as you’re done creating the pumpkin icon, you can lock its layer, and move on to the “gravestone” one and start working on it.

Step 1
Let’s start with the base of the grave by creating a 66 x 12 px rounded rectangle with a 4 px Corner Radius, which we will color using #a09793, and then position towards the middle of the smaller inner grid so that it touches its bottom side.

graphic 29

Step 2
Next, we have to make some adjustments to the shape by selecting its bottom-center anchor points using the Direct Selection Tool (A), and then deleting them by pressing Delete.

As soon as you get rid of the anchors, use the Control-J keyboard shortcut in order to close the path.

Once you’ve adjusted the shape, give it a 4 px outline using the Offset Path (right click > Object > Path > Object Path) which you will color using the same color that we’ve applied to all our outlines (#392a16).

graphic 30

Step 3
Since I feel that the bottom corners of the outline are a bit too hard, I thought we should adjust them by selecting their anchor points using the Direct Selection Tool (A) and giving them a 2 px Corner Radius.

graphic 31

Step 4
Using a similar process to the pumpkin icon, start adding a couple of highlights and a shadow to give the shape some depth.

graphic 32

Step 5
Once you’ve added the highlights and shadows, add a 66 x 1 px rectangle just above the shadow coloring it using the same color as the rest of the outlines (#392a16).

graphic 33

Step 6
Add a bunch of cracks to the piece using the Pen Tool (P) and give them some highlights where you feel it’s necessary. Then select all the shapes and group them together using the Control-J keyboard shortcut.

graphic 34

Step 7
Let’s move on to the upper section of the icon, and start working on the stone itself by creating a 52 x 98 px rounded rectangle with a Corner Radius of 26 px. Color the shape using #66605e, and then adjust it by removing its bottom center anchor points using the Direct Selection Tool (A) and finally positioning it above the bottom section making sure to vertical align the two.

graphic 35

Step 8
Give the stone an outline, and then add a highlight and a 4 px tall shadow where its bottom sections meets the base of the gravestone.

Quick tip: Where the workflow is similar to the previous steps I won’t be repeating the entire process since it will be weird, but I will give you indications where things need to be done a little bit different. In the present case since we already went over the process of creating the highlights and shadows, I trust that you should be able to apply what you’ve learned in the previous steps.

graphic 38

Step 9
Now, let’s give the stone a texture similar to the one used for the pumpkin by creating a couple of 4 x 4 px squares, which we will color using #514a48. It would be a good idea to group the texture’s elements since you’ll want to be able to keep them in place.

graphic 39

Step 10
Once we’ve added the texture, we can continue the detailing process by adding a couple of cracks and some highlights underneath each of them using the Pen Tool (M).

graphic 40

Step 11
Add two vertical highlights, by drawing a wider 2 x 72 px rectangle and a narrower 1 x 72 px one to its right side at a distance of 1 px. Color the shapes using white (#FFFFFF) and then set their Blending Modes to Overlay as we did with the previous ones, while lowering their Opacity levels to 20%.

Position the highlights to the right side of the gravestone so that their bottom sides touch the stone’s shadow.

graphic 41

Step 12
Now as you’ve probably already noticed, the top side of the highlights overlaps the highlight of the stone itself, which we will need to correct by adding a clipping mask.
To do that, simply create a copy of the stone’s highlight, and then using the Direct Selection Tool (A) remove its outer anchor points, and then close the resulting path by pressing Control-J.
Then simply select the new shape and the two vertical highlights and right click > Make Clipping Mask.

Quick tip: in case you’re wondering why I prefer using clipping masks instead of Pathfinder, well the answer is really simple, while Pathfinder could achieve the same result, it won’t allow me to adjust my shapes later on if I find that I need too, which for me is a deal breaker.

graphic 42

Step 13
We’re almost there, but something seems like missing? Oh, right, the cross.

Let’s grab the Rectangle Tool (M) and create a 16 x 6 px shape which will act as the horizontal line and another 6 x 22 px one, which will act as the vertical one.

Position the horizontal line towards the top section of the secondary line so that you have a gap of 6 px between the two. Then, color the shapes using #392a16, group them (Control-G) and then position them towards the top side of the stone, aligning the cross to the middle.

graphic 43

Step 14
Using the Rectangle Tool (M) create a 20 x 8 px shape, and then color it using a dark grey (# a09793). Since this will act as the name plate, we will have to stylize its corners by creating four 4 x 4 px circles which we will use in combination with Pathfinder’s Minus Front option to create those nice looking inner cutouts.

Now, since the Offset Path effect won’t be able to create an accurate outline, we will have to create it manually by drawing a 28 x 16 px rectangle which will follow the same stylizing process as before, only this time we will use four 8 x 8 px circles.

Once you have the outline shape, simply color it using #392a16, and then make sure to position it underneath the plate itself.

graphic 44

Step 15
Add some highlights to the plate and then using the Rectangle Tool (M) draw two horizontal lines, one thinner and one thicker which will represent the name.

Finally add two 2 x 2 px circles to each side of the plate, which will act as a pair of little screws holding the plate, and a shadow underneath its outline to give it more depth.

graphic 45

Step 16
Add the three little diamond shaped highlights towards the top right corner, by creating a copy (Control-C > Control-F) of the ones from the pumpkin icon.

graphic 46

Step 17
Since at this point we’re pretty much done with the gravestone itself, it’s time to start working on the little skull.

First, create a 14 x 14 px circle and color it using a light grey (#d3c6c1). Then, add a 10 x 6 px rounded rectangle with a 1 px Corner Radius just above it, coloring it using the same color.

Now, with both shapes selected, give them an Offset of 4 px making sure to group them together (Control-G) and then position them towards the lower left corner of the stone, so that the jaw’s outline touches the outline of the grave.

graphic 47

Step 18
Add a pair of eyes to our little skull, by creating two 4 x 4 px circles (#392a16) which we will distance at 2 px from one another, and then position towards the middle lower section of the skull.

Then add a little nose and two teeth insertions to make the object look like an actual skull.

graphic 48

Step 19
Finish off the skull by adding a nice all-around highlight, and two overlapping elliptical ones towards the top section of the skull.

graphic 50

Step 20
Lastly, let’s add the little blood drips from underneath the skull.

First, select the Rounded Rectangle Tool and create a 2 x 9 px shape, which we will color using a dark red (#c95b55), and then adjust by removing its top center anchor points in order to give it a flat edge. Then create a copy and adjust it by shortening its height to just 4 px, and position it on the original’s right side leaving a gap of 2 px between the two.

With both shapes selected, give them a 2 px outline using the Offset Path, and then position them towards the left side, underneath the skull, so that the red fills touch the top side of the grave’s grey fill.

graphic 51

Step 21
Since we want the two drip lines to be connected, we will add a 2 x 2 px square in between them, which we will adjust by cutting out a 2 x 2 px circle from its lower half.

graphic 52

Step 22
Finish off the gravestone icon by adding a couple of highlights to the blood drips, using the same Overlay Blending Mode but a slightly higher 50% Opacity level.

graphic 53

7. Creating the Eyeball Icon

We are now down to our final icon, the eyeball one. As usual this means we will be locking the “gravestone” layer and move on up to the next and final one.

Step 1
Using the Ellipse Tool (L) let’s create the base fill for our eye, by drawing a 64 x 64 px circle, which we will color using a dirty grey (#d3c6c1), and then position it towards the bottom side of the third grid set leaving a gap of 7 px between it and the smaller inner grid.

As always, don’t forget to give it that 4 px outline.

graphic 54

Step 2
Give the inner fill a ring highlight with the Blending Mode set to Overlay and the Opacity to 50%.

graphic 55

Step 3
Since the eyeball itself is slightly rotated so that its iris will be looking up, we will have to add a second circle over the inner fill that we already have, and position that towards the top, so that the current fill will act as a bottom shadow section.

First, select the fill, and create a copy after it (Control-C > Control-F), which we will position towards the top at a distance of 6 px from the original. Then change the shape’s color to something brighter (#e5ddda), making sure to mask it so that it will remain confined to the boundaries of the underlying circle.

Also, since the ring highlight needs to sit on top, we will have to select it and bring it to the front by right clicking > Arrange > Bring to Front.

graphic 56

Step 4
Now, let’s add that texture that we’ve used for all the previous icons, only this times mix it up a little by drawing both 2 x 2 px squares and a couple of 1 x 1 px ones, which we will color using a darker shade of grey (#bdb1ac).

Leave the center of the eye free of any details since they won’t be visible once we add the inner iris section.

graphic 57

Step 5
Start working on the iris, by drawing a 30 x 30 px circle, which we will color using a swamp green (#6a6e48), and then position towards the top section of the main eye fill, at about 13 px from its top side.

Give it a 4 px outline, and then add a smaller 14 x 14 px circle to its center which will represent the pupil.

graphic 58

Step 6
Give the iris a ring like highlight, making sure to set the Blending Mode to Overlay and the Opacity to 20%.

graphic 59

Step 7
Start adding a bunch of scattered 1 x 1 px squares (#392a16) which will give it a nice looking texture.

graphic 60

Step 8
Next, start adding a bunch of circle like reflections to the top right and bottom left corners of the iris, using the same Blending Mode and Opacity level as before.

graphic 61

Step 9
Give the eye a visual pop by adding a overlaying highlight over the top half of the iris, making sure to mask it using the green shape from underneath.

Use Overlay as the Blending Mode and crank up the Opacity to 30%.

graphic 62

Step 10
Add a subtle shadow underneath the iris’s outline, by creating a copy of the later, and moving it towards the bottom by 2 px.

Change its color to #d3c6c1, and make sure to position it underneath the outline and not the other way around.

graphic 63

Step 11
Grab a copy of the diamond shaped highlights from one of the previous icons, and position it towards the right side, and then add two more circular reflections to its left to really make it shine.

graphic 64

Step 12
As with the pumpkin icon, I’m going to give you the ability to get creative and draw your own version of this cute little eye stabbed icon.

As always, keep it consistent, use as much details as you can, and don’t forget to keep those outlines at 4 px.

graphic 65

Huurraay we’re finally done guys!

graphic 66

I really hope you’ve enjoyed the tutorial and most importantly learned something new during the process. That being said, I’m looking forwards to seeing your final designs, and if you have any questions just leave them in the comments section and I’ll get back to you in a jiffy.

And for more resources like these, join our Arsenal Mailing List!